APPLICATIONS

APD(Avalanche Photo Diode)
Electron Multiplier
Hibrid Photo Detector
Bar Code Scanners
Bomb Detectors
Cellular Electrophoresis
Detectors
E-chuck(Electrostatic Chuck)
ESD(Electrostatic Discharge Testing)
Flow cytometry
FPD(Flat Panel Ditector)
Gamma Cameras
Geiger Counter
GM Tubes(Geiger Mueller Tubes)
Hi Pot Testing
Immunocytology
Ion Mobility Spectrometry(IMS)
Ionizers
Leak Detector
PMT,MM,radiation counter
Electron Beam/Ion Beam
Mass spectrometry
PhotoMultiplier Tubes
Scintillators
Electron Guns
Ion Guns
Nuclear Instruments
Electrostatic lenses
Spectroscopy
Microchannel Plates

SUMMARY
The MA serise ie a regulated, versatile,modular HV power supply used in a wide variety of applications  including mass spectrometry and Electron Microcopes.From the OEM to the laboratory,they are an excellent choice when you require a highiy stable output.Output can be controlled using either an external control voltage or external variable resistor.With a diverse range of models up to 30KV/60W,you will find something for nearly every requirement.

SPECIFICATIONS
Input Voltage:
+24Vdc±2V. Other input voltages available on special order.
Input Current:
Less than 0.3A at full output.
Output Voltage:
Continuously adjustable over entire output range. Available
in either positive or negative output polarity. See table for
voltage ranges.
Output Voltage Control: Controlled by either:
1) Internal ten-turn potentiometer
2) External potentiometer 5k to 100k (set internal pot. to max.)
3) Remote differential voltage programming (0 to +10V gives
0 to full output).
Accuracy 0.1%.
Remote Control:
Remote programming Common Mode Range: 0VDC to +10VDC
Line Regulation:
0.001% for input change of 10%.
Load Regulation:
0.001% for 0 to full load change(at maximum voltage).
Temperature Coefficient:Better than 25ppm/°C.
Stability:
<0.007%/hr at constant operating conditions after 1 hour warm-up.
Output Voltage and Current Monitors:
Voltage: 0 to +10V represents zero to full output ±1%.
Current: 0 to +10V represents zero to full output ±2%.
Temperature:
Operating: 0°C to +50°C.
Storage:    -35°C to +85°C.
Connectors:
Input: 6 OR 8 pin connector (mating connector supplied).
Output: Output voltage 0.3-5kV: 500mm cable
Dimensions:
0.79" Hx2.36" Wx2.76"D
(20.00mmx60.00mmx70.00mm)